Welcome to our website!

Current location:Home > News > Enterprise News
Enterprise News

SINOPEC Delivery: Water Injection Pump

2020-08-08 16:45:21 Chongqing Pump Read

重泵公司2台ZDP160-50型增压注水泵成功交付

SINOPEC Delivery: Water Injection Pump

Two sets of water injection pump units (ZDP160-50) of CQPI passed the performance tests & FAT witness by a joint review from  TUV, customer and CCS, ready to departure  to SINOPEC offshore platform. 

   X月X日,重泵公司设计、制造的2台ZDP160-50型注水泵,顺利通过TUV工程师、客户代表、船级社代表的性能检验和出厂验收,全部下线,即将启运业主现场。

The pump unit was ordered by a French client to be used in an offshore platform of SINOPEC as a booster pump for the water injection system to ensure higher pressure for the injection well as well as  outcome increase.

    该泵为法国一国际公司订购,将用于中石化一海洋采油平台,作为油田注水系统的增压注水泵,以保障更高压力的注水井所需的注水压力,达到油田增产之目的。

The flow rate is 150m3/h, the head is 500m. And the motor power is 400KW. It fully conforms to BB3 structure of API610.  As the inlet pressure of the pump is 12~14MPa, and the outlet pressure reaches 18~20MPa, it adopts symmetrical arrangement to ensure the self-balance of axial force, and adopts axial split for pump casing to facilitate the inspection and maintenance. PLAN11 is adopted for mechanical seal flushing. 

    泵的额定流量150m3/h、额定扬程500m。由于该泵的进口压力12~14MPa,出口压力将达到18~20MPa;叶轮采用对称布置,以保证轴向力自平衡,泵体采用轴向剖分式结构,方便开盖检查维修,采用PLAN11方案冲洗机械密封。该泵完全符合API610标准的BB3结构形式。

blob.png

CQPI is a state-owned company affiliated with Chongqing Machinery & Electronics Holding (Group) Co., Ltd.(CME), specializing in the research, development, design and production of high-end pump and systems. It has two main category products, the positive displacement pump and centrifugal pump. The company established in 1951, and it has sustained profitability and steady development, there are more than 1000 employees, and it covers an area of 200,000m2. Awarded the "national enterprise technology center", passed the assessment of “integrated management system of informatization and industrialization", and awarded “API Q1”. With the platform of "whole-life cycle management and remote operation and maintenance ", the product is widely used in the industry of oil and gas, chemical, mining, metallurgy, steel, nuclear power, thermal power, water supply and drainage etc. in domestic and abroad, and has been exported to more than 30 countries all over the world. 

重庆水泵厂有限责任公司是重庆机电(控股)集团旗下专业从事高端工业泵类产品及系统研究、开发、设计、生产于一体的国有企业,覆盖容积泵及离心泵两大类产品。重泵始建于1951年,持续盈利、稳定发展,现有员工1000余人,工厂占地面积200,000平方米;获得“国家企业技术中心”的授牌、通过国家“信息化和工业化融合管理体系 要求”的评定、拥有“API Q1”证书、携“机泵全生命周期管理及远程运维”平台,广泛服务于国内外油气、化工、矿山、冶金、钢铁、核电、电力、给排水等领域,已出口到全球30多个国家和地区。

blob.pngblob.pngblob.pngblob.pngblob.png